9 Best Ways to Keep Rugs From Slipping on Laminate Floors (Must-Try!)

Laminate floors have a lot going for them – they’re easy to clean, durable, and add a touch of modernity to our homes.

But if there’s one thing that can make you do an unintended dance routine, it’s a rug that just won’t stay put. Why bother keeping rugs from slipping on laminate floors, you ask?

Imagine you’re walking through your cozy living room. And suddenly your foot catches the edge of that rug, sending it skidding across the floor. Not only does it disrupt your smooth stride, but it can also pose a safety hazard for you and your family.

So, that’s why we’ve included some tips to keep your rug safe and prevent any potential accidents or damage. No more accidental rug surfing – let’s make sure your rugs stay right where they belong!

But first, let’s learn why a rug slips on laminate floors.

What Causes a Rug to Slip on Laminate Floors?

Answering this question is complex but can be explained in a few steps.

  1. Smooth Surface: Laminate floors are known for their smooth and often glossy finish. This sleek surface provides little friction for the rug to grip onto, making it more prone to slipping.
  2. Lack of Rug Padding: Some rugs come without proper padding or backing. Without a secure grip between the rug and the floor, it’s easy for the rug to shift and slide when walked upon.
  3. Rug Material: Certain rug materials, especially those with smooth or glossy backing. Can exacerbate slipping issues on laminate floors. The combination of the rug’s material and the laminate’s smooth surface creates a slippery duo.

Understanding these factors helps us tackle the problem at its root. By addressing the slip-inducing elements, we can put in place practical solutions. To keep our rugs in place on laminate floors.

What Happens If Rugs Slip on Laminate Flooring?

Rug slips are often associated with negative implications such as;

  • Physical injuries from accidental falls
  • Transfer dirt to a clean area
  • Increased spillages around the rug
  • Scratching on the floors
  • Unpleasant living space with a bumpy and irregular-looking rug.

Tips to Keep Rugs From Slipping on Laminate Floors

Using a Non-Slip Rug Pad

It is one of the easiest ways to secure your rug on a polished hard surface, such as laminate. 

Normally, the size of a non-slip rug pad corresponds with the measurements of a sliding rug. And consider the thickness based on the foot traffic in the area. 

So, install a rug pad under your rug. It creates friction between the smooth carpet base and the polished laminate flooring. This allows the rug to stay in place.

To protect your floor from accidental damage, invest in high-quality rug pads. Because some rug pads have substandard adhesive coatings which cause the floor.

Using Natural Rubber Pads

Generally, this type of rug pad has a gridding surface ideal for thin, flat-weave rugs. Since it does not contain chemicals that can damage the floor finish.

This makes it more expensive than others. Natural rubber pads do not offer the same cushioning as normal rubber pads.

Even though they lack much cushioning, they provide excellent protection against rug slippage.

Use Rug Gripping Spray

Using gripping rug spray, you can make your rug more secure by spraying the product on its underside. Other benefits of using the spray are that it won’t stain your floors, and you can reposition your rug easily.

But, unlikely many other cleaning products, most rug-gripping sprays are susceptible to freezing. So they should be kept at room temperature until they are required.

Invest in Non-Slip Rugs

Use non-slip rugs that have a rubber or latex underside. This helps to prevent them from sliding on laminate floors.

Several rugs come with non-slip backings in the market. So you don’t need to worry about separately securing each rug. You can always consider them if you are in the market for a new set of carpets or planning to replace an existing one.

Still, rugs with non-slip backings may not stick to a high pile laminate floor. And it may need an extra method for ensuring that the rug is properly secured to the floor. 

Also, these rugs are designed to be used on low-pile laminate floors with plush features.

Also See: How To Choose The Right Rug For Your Living Room?

Apply Caulk

Caulking is the best way to secure rugs to the floor.

Someone needs to apply caulking to the back of the rug, focusing on the edges and then caulk lines in the middle. To ensure the caulking adheres to the rug back properly, flatten it once it has dried.

On laminate floors, a modified rug with fully dried caulking can be used without slipping. As a result, the dry caulk reduces slippage between the rug and the laminate floor.

Yet, it is discouraged for those with expensive rugs. Chipped bits will eventually break off, resulting in the rug being damaged over time. Recommended for cheap rugs.

Must See: Can you Caulk Around Flooring? (All You Need to Know!)

Using a Hot Glue Gun

It is also possible to apply hot glue to the back of the rug to prevent slipping. But, it is not as durable as silicone caulk. Hot glue dries faster than silicone. But, it should be tested first to ensure that the temperature will not melt the rug’s fibers.

Also, hot glue can damage your floor and the rug, making a sticky mess. So, you should choose safer options such as rug gripper pads, double-sided tape, or non-slip rug pads. These options will keep your rug secure without causing any unwanted damage.

Anchor with Furniture Weight

A majority of people have tried this at some point. It is usually the cheapest and simplest method. And it only requires rearranging furniture and other heavy household items.

The weight of the furniture acts like a natural anchor, keeping the rug in place.

Place a small piece under a heavy household item, like a bed, couch, dresser, table, or wardrobe, to weigh down rugs. This method is usually recommended for rugs in living rooms. 

Having a large surface area, rugs on laminate floors can be anchored by many heavy objects. It’s an easy and effective way to stop the rug from slipping.

Use Double-Sided Rug Tape.

These tapes have sticky ends to make securing the rug to the floor easier. 

You need to peel off the tape on both sides and attach one side along the rug’s central lines and entire perimeter.

The other sticky end rests on the laminate floor. They are usually cheap, easily available, and easy to use. As a result, the rug can better grip the floor and prevent slipping.

To prevent residues on your floor or rug, buy high-quality tape with adhesive. 

This is recommended only for cheap rugs and laminate floors. The residue could damage your rug and floor.

So, lay the tape along the edges of your rug, press it down, and let it work its magic. It’s an easy, affordable, and mess-free way to ensure your rug stays put, even in high-traffic areas.

Use Velcro strips

Velcro is another option you could use to secure your rugs without spending a lot of money. 

The Velcro strips are relatively easy to use. You peel off the protective strips from the backs of the adhesive sides, then attach them. Velcro is scratchy, so attach the loop under the rug and the hook on the floor. 

Your rug is guaranteed to be secure on your laminate floor by joining the hook and the loop.

Attach Velcro strips with great care. When adjusted frequently, adhesives on the backside can damage your rug or laminate. It’s like giving your rug a best friend it can’t escape from.

FAQ: How to Keep Rugs From Slipping on Laminate Floors?

Can area rugs ruin laminate floors?

Laminate flooring is affordability and durability. But, it can still be stained or scratched by dyes or rough fibers. Natural fiber, plastic, or other rough-textured rugs will scratch laminate flooring.

Will latex-backed rugs damage laminate floors?

There is a possibility that latex-backed rugs can permanently stain laminate floors. The plasticizers in the latex react with the surface and cause discoloration.

Will carpet tape ruin laminate floors?

Generally, carpets can damage laminate floors. The adhesive in some carpet tapes may be too strong for the laminate surface. So, it leads to residue or even peeling when you try to remove the tape.

Read More on Laminate Floors


Leave a Reply

Your email address will not be published. Required fields are marked *