How To Remove Candle Wax From Laminate Flooring? (4 Easy Steps)

You can easily remove candle wax from laminate flooring with the right tools. Although many people believe it is impossible to remove, this is not true. It would be best if you were quick enough to clean the wax because it will be difficult to remove later.

And when it comes to candles with darker colors, the wax can stain your floors because of the dyes contained within. To limit the damage, you should try to remove the wax as quickly as possible.

Therefore, here are effective ways to remove candle wax from a laminate floor without breaking the bank.

Table of Contents

Tips to Know Before Removing Candle Wax from Laminate Floors

Scrap In One Direction: Do not scrape the floor in a disorderly manner. Move from top to bottom in one direction. Doing this will prevent the wax from spreading and causing a hole.
Avoid Using Ammonia: Using ammonia to remove wax from laminate floors may seem easy and effective, but it’s not. Ammonia can remove laminate floors’ protective sealants.
Do Not Use a Steel Wool: Using these products can damage the floor surface and are too aggressive for floor cleaning. Avoid using them if you wish to protect the laminate finish.

Always Use a White Cloth: Mopping should be done with a white cloth. When a colorful cloth is wet, it can emit colors onto the laminate floor and ruin it.

How to Remove Candle Wax from Laminate Flooring?

Step 1: Gather the Supplies Needed

Gather the supplies needed for this process, including paper towels, plastic putty knives, and laminate floor cleaner.

Step 2: Using a Putty Knife, Scrape Off All the Wax

As soon as you have all your supplies, you should take your plastic putty knife and scrape off any accumulated wax on your laminate floor.

You need to use a plastic putty knife on this because if you use the metal one, it will leave these nasty-looking scrapes all over the area you are trying to clean.

Take your putty knife, put it flat on your floor, and begin with scraping. Make sure you scrape in one direction and don’t gouge one side of the putty knife and your laminate floor because it could leave some scrapes.

Step 3: Spray Laminate Flooring Cleaner

After you have the majority of the wax-up, take your laminate flooring cleaner and spray it onto the target area.

Step 4: Using a Putty Knife and Paper Towel, Wipe it Off

And after a couple of minutes, take your putty knife and wrap it with your paper towel around it. And wipe it right over the area. That way, you can get a little bit more pressure on there.

Alternatives Ways to Remove Candle Wax Laminate Flooring

Apply Soapy Water to The Wax

Start by applying some soapy water to the wax. We don’t want to use a lot of soap, making it more difficult to remove the wax from your laminate floor later on. Instead, put a little bit on the floor and rub it in with your fingers. It will loosen up the wax and make it easier to wipe up later.

Try a dry cleaning solvent.

One way to remove candle wax from a laminate floor is with the help of a dry cleaning solvent. Use the solvent in a well-ventilated area and use it with caution when using it.

Pour some dry cleaning solvent onto an old towel or rag, and rub it on the wax until removed. If this doesn’t work, you might need to spray water on the wax before applying the dry cleaning solvent.

If that still doesn’t work, try using an abrasive sponge to loosen up the wax, and then go back over it with a dry cleaning solvent.

Use Olive Oil to Remove Wax

Apply some olive oil to remove the wax. This method might be the simplest option. Take an old paper towel and dip it in olive oil. Wipe the wax off of your flooring with it, and the wax should come right up.

Try an Ice Cubes

Another way to remove wax is to take a few ice cubes out of the freezer, place them on the top of the wax stain, and then scrape up the wax with a spoon. It is the perfect solution for smaller stains.

Use Acetone or Nail Polish Remover

The easiest way to remove wax from a laminate floor is by using acetone or nail polish remover. Saturate the wax with one of these liquids, wait for it to dissolve, and then wipe it off the surface. Acetone and nail polish remover break down the resin in the wax, making for easy removal.

See Also: Will Acetone Damage Laminate Floor?

Scrub the wax with a scrub brush.

One of the easiest ways to remove candle wax from your laminate floor is by scrubbing it with a scrub brush and some soap. Begin by sprinkling a little soap on the floor in the area with wax.

You can use an old toothbrush or any scrub brush to loosen the wax.

Then, use your hands to rub the scrub brush back and forth in that same area until all of the wax has come loose. Once you’ve gotten most of it off, go over it with a dry cloth or paper towel to ensure all residues have been cleared away.

To Conclude

Removing wax can be difficult, but it is not impossible. You can now remove candle wax from your laminate floor by following these simple instructions.

If the wax has not completely been removed from the laminate floor, you can use paint thinner or mineral spirits to clean it again. Wear eye protection and gloves to prevent irritations and make sure you have enough ventilation.

Now that you know how to remove candle wax from a laminate floor, you will be able to keep your floor looking clean and shiny.

Read More on Laminate Floors

How to Remove Candle Wax from Laminate Flooring? (4 Easy Steps)

Tips to Know Before Removing Candle Wax from Laminate Floors